wzx underwear customization manufacturers interpret the production process of women's underwear

HOME

News

2022/05/30

WZX –shapewear manufacturer

wzxmart provides you with free body clothing OEM, underwear private customization, body carving clothing investment and other related information release and information display, so stay tuned! Underwear looks very simple, only a few pieces of cloth underwear are composed of several pieces of cloth underwear, in fact, the process is very cumbersome, so how is underwear made, and what craft does it have? Today, underwear custom manufacturers will tell you in detail the production process of underwear. Bra shape design (1) Bra shape Bra shape design mainly includes cup design, mold cup design and broken seam design. Cup Forms Bra cups come in a variety of forms and can be designed as full cup, 3/4 cup and 1/2 cup according to their area.

Full cup means that all the breasts can be contained in the cup, especially the lower side and the front center of the human body. It has strong supporting, lifting and concentrating effects. It is the most functional cup, suitable for plump breasts or Women with soft muscles, so that the wearer's chest is stable, comfortable and secure. The method of side pressing and beveling of the steel ring is adopted, so that the cup has the function of concentrating the chest and chest in the middle, which is slightly inferior to the whole cup, but the effect is better, and the shape is changeable, which can better reflect the graceful curve of women. 1/2 cup is suitable for young women with small bust, and the effect of improving the chest is better, especially after removing the shoulder straps, you can wear a low-cut skirt with off-the-shoulder.

The ripped cups are the most likely part of the bra to be redesigned and changed. Depending on the form of the fracture, there are the following structural types: horizontal upper and lower cups, left and right cups, T-shaped fractures (broken seams), oblique upper and lower cups, left and right cups, T-shaped fractures, single fractures Folding cups, etc. ?Mold design Bra mold cups are divided into seamless mold cups, cotton bras and single-layer bras.

The seamless mold cup forming adopts special heat setting equipment to make various sponge cups with suitable fibers such as polyamide fibers and synthetic fibers. If transparent or fleshy light fabrics and seamless mold cups are heat compacted together, a product equivalent to an "invisible bra" can be formed. The multi-scar bra is a high-tech all-silicon bra. Its function is to improve the deformation of the bra, which not only increases the shape of the chest, but also has a natural texture similar to the natural shaking of the chest, which overcomes the traditional bra. The hardness is especially suitable for the bottom wearing of open bodice and open chest dress.

First, the plump cotton is hot pressed to a certain thickness, the two layers of knitted fabric are bonded together, the cotton cup is sewn into shape by changing the cup shape and cutting and fixing the lower edge steel ring, and then connected with other parts. A single layer bra is where the cups are sewn and shaped on a single layer of cloth without a cotton lining. The single-layer bra is cut and uses the elasticity of the fabric to form the three-dimensional curve of the chest, making it more cumbersome to cut and a higher degree of fit.

(2) Bra structure Although the bra is small, it is the most complex variety in underwear products. A bra is composed of upper cup (upper support), lower bowl (lower support), chicken heart (heart), lower grill, pull tab (rib cloth), ears, shoulder straps, adjustment rings, etc. Bra technology design (1) Design of materials The bra has the most processes, the most miscellaneous materials and the most difficult design in the production of underwear.

In general, bras require sponge mold cups, main fabric, lace (lace), colored insulating molds, warp knitted mesh and light elastic, profiled yarn, rubber bone, non-woven, cotton knit or muslin, shoulder straps, rubber bands ( measuring root), steel ring, fastener, adjusting ring, diagonal strip (bundling), flower card (decorative flower), transport mark (mark + component mark), hanging board, sewing thread and other materials, such as light Elastic fabric, positioning yarn, rubber bone, non-woven fabric, cotton knitted or muslin, shoulder strap, rubber band (gauge root), steel ring, fastener, adjusting ring, diagonal strip (bundling), flower card (decorative flower) , transport mark (mark + part mark), hanging board, sewing thread, etc. ". (2) Process design The production method of bras is a collective operation method, which requires many people to work at the same time to complete. Standard bras are generally divided into 20 to 30 processes, using more than a dozen special sewing machines with stitch functions. , Each person operates a process, consisting of more than 20 to 30 people to form a production line, including the synthesis of the cup core (non-woven fabric), the upper cover, the stitching of the lace, the connection between the two cups and the center, and sewing the left and right pull tabs. Zigzag upper and lower bust elastic band, double-needle binding bowl, hand-in steel ring, stitched shoulder strap, bag back hook, stitched decorative flower, sewing trademark, hang tag, jujube, thread trimming, inspection, review, Labeling, packaging and other processes.

Which bodysuit OEM is the best? What is the quotation for underwear private customization? How is the quality of body carving clothing investment? wzxmart professionally undertakes OEM of body clothing, private customization of underwear, investment invitation of body carving clothing, and private customization of underwear.

Just tell us your requirements, we can do more than you can imagine.

*Name
Format error
*E-mail
Format error
*Phone
Format error
*Company Name
Format error
*Content
Format error

Send your inquiry

*Name
Format error
*E-mail
Format error
*Phone/WhatsApp/Skype
Format error
*Company Name
Format error
*Content
Format error