wzxmart provides you with free body clothing OEM, underwear private customization, body carving clothing investment and other related information release and information display, so stay tuned! How to clean body sculpting underwear and maintenance methods 1. The lotion should not be directly attached to the clothes. It should be dissolved in water before putting the underwear in. At the same time, hot water should not be used. Hot water will weaken the elasticity of the bra and make the bra stronger. Alkaline washing powder is too alkaline, which will make the bra yellow and unsightly; 2. Try to wash it by hand, without washing machine or dryer, otherwise the shoulder straps or other small parts of the bra will be easily pulled, and the delicate underwear on the underwear Lace is also easy to be damaged, and there is no problem with how the steel ring is nested inward, but if it is twisted with a washing machine, it will be like twisting a twist, and the steel ring will be twisted and deformed. 3. Do not mix dark and printed clothes to avoid contamination. 4. Do not use bleach to avoid material deterioration and embrittlement (colored underwear must not be bleached).
5. Please use weak alkaline or neutral washing powder, or use cold detergent, in addition to good washing feeling, it can reduce the worry of fading and discoloration. Remember: Do not use chlorine bleach to prevent discoloration. 6. Wash it often and in a short time, rinse it cleanly, gently rub and wash quickly and dry it 7. Hand wash with cold water, drop a little detergent in it (before the detergent is completely dissolved, do not put the underwear in to prevent it from appearing spots), put the underwear in and soak it for a while (about 5 to 10 minutes, if the time is too long, the dirt will adhere to the clothes again).
8. When washing, the buttons must be fastened to avoid hooking with other clothes. Rub the particularly dirty places with your hands, and the cup part only needs to be gently washed with water. If the velvet part of the steel ring is still a little dirty, you can rub it with the strap or brush it with a small toothbrush. The residual detergent is easy to cause discoloration, and it is also harmful to the skin. Please wash it thoroughly with clean water (do not soak it in tap water for a long time, because the chlorine in the water will make the underwear discolored.
9. Washing labels are very important: Cleaning is one of the key points of underwear maintenance. Please read the washing labels carefully before washing, and wash as required. 10. Use neutral washing: We choose neutral washing, which should be dissolved in water first, and avoid pouring laundry detergent or washing powder directly on the clothes, so as to avoid uneven color. How to maintain body sculpting underwear: 1. Pay attention when drying clothes: After washing, gently squeeze or wrap the underwear in the middle with a towel to absorb moisture, shake it a few times, level it, try to flatten the wrinkles, and use a clip to hold it without elasticity place, hang upside down.
(The lace of the bra becomes sinking and piled down after being soaked in water. It is ugly after drying, so it should be hung upside down in a ventilated place to dry.) 2. After washing, it should be dried immediately, so as to avoid wrinkles when it is in a wet condition for a long time. and fading. ?3. Direct sunlight is the reason for the yellowing, fading and weakening of the bra, and the indoor heating will also cause yellowing, please avoid it. Which bodysuit OEM is the best? What is the quotation for underwear private customization? How is the quality of body carving clothing investment? wzxmart professionally undertakes OEM of body clothing, private customization of underwear, investment invitation of body carving clothing, and private customization of underwear.